19 IP Video Installation Pointers

Learn a few tips on what to do when installing video surveillance equipment.

The use of network-based technology for signal transport has made all the difference in ease of installation and advances in system functionality. In order to derive the full potential available in most IP-based video surveillance systems it’s imperative that you use the right cable and that it be installed properly.

Here are a few dos and don’ts that security integrators should consider when installing the IP cameras they install:

  1. You must match UTP connected devices, such as couplers, modular plugs and wall plates, to the Category of the cable used and do so consistently installation-wide
  2. By design and specification, cable runs in an IP camera system can only extend up to 295 feet for optimum performance
  3. Bend radius of both Cat-5e and -6 cables must be limited to four times the cable diameter; the accepted bend radius is no less than 1 inch
  4. Pull tension while installing Cat-5e/-6 cable cannot exceed 25 pounds
  5. Before stripping the sheath from a cable in a wall box, limit the length so the excess can easily be pushed back into the wall cavity
  6. Do not staple Cat-5e/-6 cable; instead, use D rings, bridle rings, J hooks and other devices that do not risk altering the outer form or dimensions of the cable
  7. Maintain a 6-10 inch parallel distance between Cat-5e and -6 cables and those that carry 120/240VAC
  8. Strip Cat-5e/-6 cables back as little distance as necessary when attaching them to connecting devices
  9. Use either the T568A or T568B connection format and adhere to just one throughout the entire installation for conformity

RELATED: Zooming In on Game-Changing Video Surveillance Technologies

Cable is not the only aspect of a successful IP camera installation:

  1. Whatever the make and model of the IP camera(s) is that you decide to use, it must be suitable for the environment in which it’s deployed
  2. Consider the amount of low and bright light that your camera(s) will be subjected to when making your camera selection
  3. Pay particular attention to camera placement, being mindful of the field of view, any obstructions that might prevent a clear of the target
  4. Be sure there is network connectivity available in the vicinity of where your camera will be placed
  5. Use surge protection with all outdoor cameras, especially in areas known for lightning
  6. Assure that the PoE power supply you use is adequate to the job; be sure to compute the power load before making a final choice
  7. Use a vandal-proof housing in areas prone to crime to assure the integrity of the camera
  8. Cat-6 UTP is always best, but Cat-5e should do an adequate job of handling most video transport needs which will save money
  9. Using fiber instead of metallic does have its advantages; foremost it allows you to run camera signals at greater distances and with greater bandwidth than metallic cable can provide
  10. Last but not least, use safe installation practices to assure that every installer goes home at the end of the day

Al Colombo is a long-time trade journalist and copywriter in the electronic security market. His experience includes 15 years as a field technician and 28 years in technical writing.

 

 

If you enjoyed this article and want to receive more valuable industry content like this, click here to sign up for our FREE digital newsletters!

Tagged with: Video Surveillance

About the Author

Contact:

Al Colombo is a long-time trade journalist and professional in the security and life-safety markets. His work includes more than 40 years in security and life-safety as an installer, salesman, service tech, trade journalist, project manager,and an operations manager. You can contact Colombo through TpromoCom, a consultancy agency based in Canton, Ohio, by emailing [email protected], call 330-956-9003, visit www.Tpromo.Com.

Security Is Our Business, Too

For professionals who recommend, buy and install all types of electronic security equipment, a free subscription to Commercial Integrator + Security Sales & Integration is like having a consultant on call. You’ll find an ideal balance of technology and business coverage, with installation tips and techniques for products and updates on how to add to your bottom line.

A FREE subscription to the top resource for security and integration industry will prove to be invaluable.

Subscribe Today!

Get Our Newsletters