SSI logo

Fire Side Chat: Cracking the 2013 National Fire Alarm Signaling Code

New requirements for total coverage, remote alarm indication, audible and visible notification, mass notification systems, and evacuation messages are among the many changes in store for the latest version of NFPA 72. Get a jump on what you’ll need to know to satisfy AHJs with an overview of the updated National Fire Alarm and Signaling Code.



By ·

<p>It is now required that the system designer must identify rooms and spaces where audible notification shall be used. The designer must also identify rooms and spaces where notification will not be provided. Photography ©istockphoto.com/yenwen</p>Chapter 24 Adds Layered Explanations

In Paragraph 24.3.2, Microphone Use, all users of microphones that are to be used for emergency communications shall be provided with posted instructions on how to use the mics. This can be accomplished through a diagram.

The concept of mass notification system (MNS) layers has been added to the standard:

  • Layer 1 - In-Building MNS, controlled only by authorized users.
  • Layer 2 - Wide-Area MNS, controlled only by authorized users.
  • Layer 3 - Distributed Recipient MNS, notification of personnel through individual measures.
  • Layer 4 - Public Media Notification, Broadcast Radio, TV and so forth.

The section on Risk Analysis for Mass Notification Systems has been expanded to provide additional information for the practitioner. A risk analysis checklist has been added to the annex. Within Section 24.4, One-Way Emergency Communications Systems, the concept of message templates has been added to the standard. This requires messages be established for each scenario included in the emergency response plan.

For all evacuation messages, a tone in accordance with Chapter 18 must be used for two cycles before and after the message. For all test messages, the message now must clearly state, “This is a test.” In protected premises where occupants may be sleeping, the message shall be preceded and followed by a low-frequency tone for two cycles.

The MNS documentation goes beyond the basic requirements found within Chapter 7. This includes but is not limited to risk analysis documentation. This chapter clarifies that colored strobes are not required by the standard, but may be required by others, such as the Department of Defense (DoD). When colored strobes are used for public mode notification, their spacing must be accomplished by using the effective intensity of the strobe.

Shane Clary, Ph.D., has more than 37 years of security and fire alarm industry experience. He serves on a number of NFPA technical committees, and is Vice President of Codes and Standards Compliance for Pacheco, Calif.-headquartered Bay Alarm Co.


5 Big Changes to NFPA 72

  • New requirements for total coverage
  • Requirements for remote alarm indication
  • Design requirements for audible and visible notification
  • Mass notification system (MNS) layers
  • Requirements for evacuation messages


 

Page 2 of 2 pages < 1 2


Article Topics
Fire/Life Safety · Other · Fire/Life Safety 2 · Dr. Shane Clary · Fire Side Chat with Shane Clary · Mass Notification Systems · NFPA 72 · All Topics

About the Author
Shane Clary
Shane Clary, Ph.D., is Security Sales & Integration’s “Fire Side Chat” columnist. He has more than 37 years of security and fire alarm industry experience. He serves on a number of NFPA technical committees, and is vice president of Codes and Standards Compliance for Pancheco, Calif.-based Bay Alarm Co.
Contact Shane Clary: smclary@bayalarm.com
View More by Shane Clary
Dr. Shane Clary, Fire Side Chat with Shane Clary, Mass Notification Systems, NFPA 72


Latest Download
Presented by Western Digital, this paper reviews the many ways to store…
Trending


SPONSORED LINKS


Don't miss out! Subscribe to Security Sales & Integration magazine today. - Security Sales & Integration

EDITOR'S CHOICE