How Inputs and Voting Proceeds
Through ANSI’s Essential Requirements, any member of the public may submit a comment to a TC for consideration. NFPA is in a transition at this time from the former process of Public Proposals and Public Comments to Public Inputs. In the past, the TCs held a Report on Proposals (ROP) meeting and a Report on Comments (ROC) meeting. This has now changed to a First Draft and Second Draft Meeting. The former process had the TC voting on each proposal or comment, which could end up being very confusing to the TC, especially when various changes to a sentence or paragraph were submitted. The new process allows the committee to vote on the final wording
of the document and not on each modification that was submitted to achieve the final text.
At the TC meeting a simple majority of the members present may pass an item. This, however, is not the final vote. A letter ballot is then sent out to all principal and alternate members. For a motion to carry, two-thirds of the members voting must agree to an item. Therefore, an item that may have been a close vote at the TC meeting may not pass the letter ballot.
While there are a number of Public Inputs from the public, the majority tend to come from members of the TC. Any member of the public may speak at a TC meeting, but permission must be obtained in advance from the TC chair, and time to speak is usually limited. An interested party has greater influence as a member of a TC than one who is not a member.
Once the letter ballot has been completed, NFPA will publish a First Draft Report. This document allows the public to view the actions taken by the TC. Anyone may submit a Public Comment on any action that was taken during the First Draft Meeting. It is important to note that one may not submit new inputs at this time. The time for new ideas is only during Public Inputs prior to the First Draft Meeting. The Second Draft Meeting is similar in that it a simple majority can pass a motion, but a two-thirds member vote is required to move a motion on the letter ballot.
Security and Fire Accredited Standards Developers
- ASIS Int’l
- Central Station Alarm Association (CSAA)
- Electronic Security Association (ESA)
- FM Approvals
- International Code Council (ICC)
- National Electrical Contractors Association (NECA)
- National Electrical Manufacturers Association (NEMA)
- National Fire Protection Association (NFPA)
- Security Industry Association (SIA)
- Underwriters Laboratories Inc. (UL)
Page 2 of 2 pages <
· Fire/Life Safety 2
Dr. Shane Clary
Fire Side Chat with Shane Clary
Commenting is not available in this channel entry.