Johnson Controls Releases Lithium-Ion Risk Prevention Solution

The system is engineered to provide early-warning detection of battery failure in Lithium-Ion energy storage systems and other applications using Lithium-Ion batteries.

MILWAUKEE — Johnson Controls announces the launch of its Lithium-Ion Risk Prevention System.

The system is engineered to provide early-warning detection of battery failure in Lithium-Ion energy storage systems (ESS) and other applications using Lithium-Ion batteries such as UPS systems in data centers and manufacturing facilities.

By monitoring and mitigating battery failure before it presents a fire threat, this technology provides immense safety value for the Energy Storage industry, which is rapidly growing due to global emission reduction targets in renewable power generation — particularly solar and wind, according to the company.

Lithium-Ion batteries provide a cost-effective energy storage solution for wind farms, solar farms and data centers, but can also pose severe risk if battery abuse occurs due to mechanical damage, charging failures, manufacturing defects or external heat.

Battery abuse can result in thermal runaway — a dangerous chemical reaction within a battery cell that quickly spreads to adjacent cells. As it spreads, these cells collectively generate heat and smoke, which can potentially cause a fire event.

The Johnson Controls Lithium-Ion Risk Prevention System features monitoring and reference sensors that continuously check battery racks for the presence of Lithium-Ion off-gases.

The reference sensors provide surrounding ambient air data to the controller, while the monitoring sensors within the battery racks capture data relating to the air directly adjacent to the Lithium-Ion batteries. The sensors detect Lithium-Ion off-gases in a concentration as small as one part per million (ppm) and are compatible with all Lithium-Ion chemistries.

When the sensors detect off-gas, they immediately and automatically communicate with the battery management system to shut down the affected battery stacks to help prevent thermal runaway. In applications where the off-gases can build and cannot be vented externally, an inerting system may be employed to help prevent the off-gases from igniting.

Early intervention helps protect valuable assets — extending the lifetime value of energy storage systems while keeping surrounding assets intact.

“The unique, three-step risk prevention system integrates off-gas monitoring and early intervention with traditional fire detection and suppression methods,” says Derek Sandahl, senior product manager, Johnson Controls. “The single system with monitoring can feed into a building management system, so all battery health information is provided quickly, and the system can respond appropriately.”

The Johnson Controls Lithium-Ion Risk Prevention System can be readily integrated into existing power storage systems since it does not require any electrical or mechanical contact with battery cells. For integration with fire detection and suppression systems, it is used with AUTOPULSE, ZETTLER or FIRECLASS Detection and INERGEN or SAPPHIRE Inerting or Fire Suppression Systems.

If you enjoyed this article and want to receive more valuable industry content like this, click here to sign up for our FREE digital newsletters!

Security Is Our Business, Too

For professionals who recommend, buy and install all types of electronic security equipment, a free subscription to Security Sales & Integration is like having a consultant on call. You’ll find an ideal balance of technology and business coverage, with installation tips and techniques for products and updates on how to add sales to your bottom line.

A free subscription to the #1 resource for the residential and commercial security industry will prove to be invaluable. Subscribe today!

Subscribe Today!

Leave a Reply

Your email address will not be published. Required fields are marked *

Get Our Newsletters