8 Points to a Securer Perimeter
Protecting the perimeter of a facility, building or other potential target lies at the forefront of a comprehensive, layered security plan. When properly designed and deployed, video and its advanced technologies is one of the most effective means to deter such breaches.
Protecting critical facilities and their resources against intrusion and misuse of materials is a critical role consultants and security integrators deal with every day. Many guidelines have been released that provide information as to the type of security measures that should be considered when protecting these types of facilities. However, the details involved with making these measures a reality are often missing. As the popular saying goes, “The devil is in the details.” These details contribute greatly to the installation and operational performance of such systems.
As a security integrator intent on securing the physical assets of your client, remembering a few key tips can go a long way in ensuring the implementation meets the objectives. With that in mind, let’s take a look at eight things to consider when designing camera-based security measures or when reviewing an existing one.
1. Understand Your Cameras
Selection of a camera is often the easiest and most difficult aspect of the design. There are thousands of options out there, tons of spec sheets, IP or analog, dome or bullet. The choices are overwhelming. However, several characteristics of the selected camera sensor have a major impact on the placement and resulting coverage. Taking time to address these aspects is essential to ensure the resulting performance of the system.
Lens — The first impulse is to get a wide-angle lens to be able to view as much of the facility as possible. This is certainly a valid approach; just remember that widening the view essentially dilutes your pixels. You only have so many pixels and by widening the field of view you are spreading the same number of pixels over a wider area. The net result is the reduction in the achievable detection distance.
The converse approach is to select a narrow lens to effectively increase the detection distance. Also a common strategy, but don’t forget to think about the intended target size and speed. A narrow field of view means that the intended intruder has a shorter span of video to get across before being out of the camera view. The worst-case scenario is when the intruder is very close to the camera. For most applications, the lens choice should provide enough scene width to allow ample time for intruders to be detected at their maximum expected speed in close proximity to the camera.
Resolution — Higher resolution cameras give you more pixels, which in turn provide the ability to “see” greater distances, both with an operator at the helm or through the aid of a video analytics product. However, if you are not careful this ability to “see” more through higher resolution can be costly, as it can have a major impact on network usage, storage costs and processing requirements. The key is to understand what resolution is really required. To do that you need to know: the smallest target you want to detect (human, car, etc.); how far away you want to detect that object; and how many pixels of resolution are required by your video analytics software, or the eyesight of your security folks, to be able to “see” that object at the desired distance.
Once you have that information, you can then go back to the camera specification and determine whether it can provide you enough pixels to accommodate. If not, you may consider going to a higher resolution camera, a larger lens, or decreasing your required distance. If your experience with resolutions has more to do with New Year’s Eve than cameras, don’t try to be a hero. There are many free calculators on the Internet, as well as, many knowledgeable product suppliers where you can get this information at no cost.
Image sensor size — If you’ve spent time making camera selections, then you’ve seen camera specification sheets and have noticed some say ¼-inch CCD and others say ½-inch CCD. When designing a robust perimeter system, always supersize, right? Perhaps, but suffice it to say that the camera sensor size impacts the resulting image of the camera. Most camera range calculators will assume you are using a ¼-inch CCD sensor. If you are not, then you should probably touch base with your camera supplier to understand the effects of different size CCDs.
2. Consider the Terrain
In addition to obvious obstructions like trees and buildings, don’t forget to consider terrain variations (e.g. rolling hills) that may impact your blind zone calculations. Ditches and culverts can also prove to be a problem. Another obstruction that is often overlooked is the perimeter fence itself. Looking through the fence can be very problematic based on the angle of the view and the type of fence in question. Even a chain-link fence can appear solid when viewed from particular angles at certain times of the day.
If you enjoyed this article and want to receive more valuable industry content like this, click here to sign up for our FREE digital newsletters!
Security Is Our Business, Too
For professionals who recommend, buy and install all types of electronic security equipment, a free subscription to Security Sales & Integration is like having a consultant on call. You’ll find an ideal balance of technology and business coverage, with installation tips and techniques for products and updates on how to add sales to your bottom line.
A free subscription to the #1 resource for the residential and commercial security industry will prove to be invaluable. Subscribe today!