25 Tools for Central Vacuum System Installs
25 necessary tools to install central vacuum systems, from a pencil to a ladder to a cordless drill.
Only 16% of residential custom installation companies installed central vacuum in 2013, according to the SSI sister publication’s CE Pro Readership Study. That means you have a built-in advantage in the industry because 84% of the companies you are competing against are not offering it. If you do not offer it and the homeowner or builder wants CVAC, it also means that he will be introducing another contractor to the job… one that could take the entire project.
In a nutshell, central vacuum is a power unit, sometimes called the “can,” that creates the suction for the system. It is routinely placed in the garage, basement or utility room where other water or HVAC equipment is housed. Next is the hose and attachment set. That is typically 30 feet in length. There are longer sets available. A 30-foot hose in an arc from the outlet will cover 600 to 700 feet of living space. The outlets are then strategically located throughout the rest of the home based on the area of coverage from those 30-foot hoses.
The difference between a central vacuum system and any other type of system is that those other will inherently exhaust dust and dirt back into the room based on the way they are designed while a central vac will remove 100% of the dirt and dust it comes in contact with.
Many integrators struggle to understand the “fit” of CVAC with the home technology industry. Integrators are used to selling technology and pulling wires, so they wonder, “Why in the heck am I gluing PVC pipe together?” Well, it is PVC pipe… with some low-voltage wiring connected to it. Historically, CVAC was not plumbing. It was not high-voltage electrical. So by the nature that there is low-voltage wiring that needs to be connected to it, central vac found a niche with integrators.
25 Tools You Need
There is nothing out of the ordinary tool-wise that integrators need to carry to install CVAC. Each of these tools are typically going to be carried by a custom electronics technician, except perhaps a PVC pipe cutter, but if technicians are running wire in conduit, they will already carry that tool.
- ½-inch Right Angle Drill (Milwaukee makes a good one)
- Reciprocating Saw – Fine tooth wood blade – OPTIONAL
- 2¼-inch self-feeding Wood Boring Bit with
- 4-inch long shank
- 12- to 18-inch Bit Extension – ½-inch shank
- 2-foot to 100-foot extension cords, heavy duty
- Ladders – 6-foot and 8-foot
- Hammer
- Wire Cutter/Stripper
- Tubing Cutter – Special CVAC Pipe Cutter
- Screwdrivers
- Wood Chisel – ¾ inch – OPTIONAL
- 33-foot tape measure
- Cordless Drill
- Light for attic & crawlspace installation
- Torpedo Level
- Small Flashlight
- Pencil
- Wire nuts -small blue
- PVC glue
- 8-inch wire ties
- 1-inch Roofing nails or screws
- ¾-inch #8 screws
- ¾-inch wire staples
For retrofit installs, integrators might have to use a 9/16-inch bit for easier installation. Do not use hacksaws to cut tubing. Use tubing cutter specified. Ask your distributor or sales person for details.
If you enjoyed this article and want to receive more valuable industry content like this, click here to sign up for our FREE digital newsletters!
Security Is Our Business, Too
For professionals who recommend, buy and install all types of electronic security equipment, a free subscription to Commercial Integrator + Security Sales & Integration is like having a consultant on call. You’ll find an ideal balance of technology and business coverage, with installation tips and techniques for products and updates on how to add to your bottom line.
A FREE subscription to the top resource for security and integration industry will prove to be invaluable.