Rack Experts Share Tips to Create the Most Reliable A/V Racks Possible
Assembling a rack system requires attention to detail in order to maximize equipment performance and reliability.
Integrators need to consider fan-based cooling and uninterruptible power supplies in their custom rack designs.
By Robert Archer
FRAMINGHAM, Mass. – Few people outside of the integrators who design and install equipment rack systems give these highly customized, behind-the-scenes solutions a second thought … unless the Internet goes down, a security camera is on the fritz, or half the audio cuts out leaving a bar full of intoxicated patrons wondering what happened to the music.
While the public or end users might overlook the intricacies of a properly configured rack system, it stands as one of the most important elements toward performance and reliability. That’s reason enough to rack up some refresher points on what’s involved in their design and installation.
The Rack Category Is Evolving
It doesn’t take an engineering degree to know that weight distribution is a key element of any rack system. Tim Troast, director of product management of Middle Atlantic Products, says that while it is important to create a low center of gravity, there is more involved than simply placing light components at the top when constructing a rack.
“The most reliable systems are ones that take a system approach to incorporating well-planned cable and thermal management and adequate power protection and distribution,” he says. “A good system will isolate the signal path from power; have proper tie down, strain relief, and bend radius; and follow best practice for airflow, convection, and passive versus active thermal management.”
Middle Atlantic is working with commercial trade group InfoComm, according to Troast, to develop a standard that defines such requirements and processes for A/V equipment rack building. Troast adds that cloud-based technologies among components are helping to maintain increased levels of reliability and less periods of system downtime. Aesthetically, companies are making accommodations to better integrate smaller components and enable rack locations that are more visible, Troast says.
“As equipment has evolved into smaller form factors with several functions integrated into a single device, rack assembly design is becoming increasingly focused on size and aesthetics. With smaller rack assemblies, there’s limited space within the enclosure and within the room it’s located. Creative installation solutions optimize the smaller, compact footprints by supporting localized systems. For example, mounting small devices behind the display, under the table, in the ceiling, within furniture, in the wall, or utilizing purpose-built carts and stands in the room.”
Too Cool for Breakdowns
Next to the actual security of the products, meaning they are safely secured in place within a rack, a high priority for dealers configuring rack systems should be the thermal environment electronics components live in. Frank Federman, CEO of Active Thermal Management (ATM), says that with many components utilizing digital technologies, processors and computing elements, thermal management is a critical element of any rack system.
“These processors are operating at ever-increasing speeds and generating more heat,” he says. “The heat not only affects the solid-state switching devices, but it also surrounds passive electronic parts such as capacitors, resistors, etc.”
Some of the ways dealers can manage the thermal environments is through forced air ventilation and air conditioning products. Federman says that fan-based forced air products are typically more cost effective than air conditioning and easier to implement.
To devise a thermal management plan the amount of heat (in BTUs, or British thermal units) has to be determined, Federman says, and once that number is calculated, a simple formula will tell dealers how many CFMs (cubic feet per minute) of air-flow is needed to keep temperatures within a safe range. Look to the products’ specifications for help with the number crunching.
The next step in the thermal management process is finding a location to dispose of the hot air; equipment rooms and hallways are recommended, Federman says. The last step is to figure out what type of air moving system is appropriate. If the rack is freestanding and has a back and sides, a fan panel pulling fresh air in through a passive vent located at the bottom of the rack to the top should be sufficient. If there are no side and back panels to contain airflow, a fan panel can be used directly above the hot components.
If you enjoyed this article and want to receive more valuable industry content like this, click here to sign up for our FREE digital newsletters!
Related Content
Security Is Our Business, Too
For professionals who recommend, buy and install all types of electronic security equipment, a free subscription to Commercial Integrator + Security Sales & Integration is like having a consultant on call. You’ll find an ideal balance of technology and business coverage, with installation tips and techniques for products and updates on how to add to your bottom line.
A FREE subscription to the top resource for security and integration industry will prove to be invaluable.
